Focus on the Internet of Things, sensor design-manufacturing-technical solutions!

Engineering Department:+86-510-85382096    |     中文

%{tishi_zhanwei}%

Spotlight bracket angle monitoring

Real-time angle data monitoring the angle between the spotlight antenna and the horizontal plane, applied to the spotlight antenna on the rooftop of the community, located outdoors on the rooftop.

【Msensor Sensor】DMI2700 rotary drilling rig verticality tilt detection instrument

Real-time monitoring of the verticality deviation of the drill rod during the construction process of rotary drilling and pouring piles, with timely early warning, correction, and detection system.

Inclination sensor vehicle body auxiliary leveling device

Convert the tilt angles measured by the inclination sensor of the vehicle platform in two directions into the vertical adjustment amounts for the four support points, and output them on the display interface to provide the operators with a basis for adjustment; detect the horizontal condition of the vehicle platform.

Dam body tilt monitoring

The dam body inclination monitoring uses fixed inclinometers with a range of ±30° and a sensitivity of ≤9″. The fixed inclinometers are arranged in the longitudinal direction of the dam within the concrete core wall and on the downstream side of the dam in two directions, with a total of three sections arranged at dam cross-sections 0+021.00, 0+041.00, and 0+061.00. One section is equipped with fixed inclinometers spaced 5m apart in the elevation direction. The installation elevation of all equipment and the elevation of the pipe openings can be appropriately adjusted based on site conditions and accurately recorded.

Vehicle Wiper Angle Measuring Instrument

The MK245B angle sensor can measure the rotation angle of the left and right wiper output shafts (mainly measuring the angle of the wiper output shaft relative to the reset position at the starting position and the limit position of the wiper).

Msensor Sensor Tilt Switch Charging Pile Anti-Tipping Safety Monitoring

When the charging pile is connected to the vehicle and powered on, it should ensure that the charging pile does not lose power when tilted in any direction. The charging pile should have a tilt shutdown power-off function to prevent secondary electric shock injuries to personnel caused by accidental collisions.

ZB-HMI2000 Wireless Tilt Detection for Tower Crane Vertical Inclination Offset

Modules can be added according to the number of tower cranes, and the modules can be named (e.g., 1# Tower Crane, 2# Tower Crane, 3# Tower Crane, etc.). A report generation function can be set up, including content such as tower crane number, tower crane height, and the deviation values of verticality on the X and Y axes (distinguishing between positive and negative directions).

The tilt sensor is used in the vehicle-mounted system for wireless positioning and anti-theft tracking system.

The vehicle load wireless positioning anti-theft tracking system receives the vehicle-mounted sensor fusion information through the vehicle's main controller, obtains GPS satellite positioning information through the GPS module, and then communicates bidirectionally with the user terminal via a public mobile communication module through public mobile communication base stations, issuing local sound and light alarms, and achieving mobile, instantaneous control.

Solar photovoltaic power generation tracking system tilt sensor

Msensor Sensors recommends the tilt sensor model MK126M-ZX-360 (RS485) for single-axis and inclined single-axis photovoltaic tracking systems. Its maximum measurement angle range is 360°, with RS485 output. It uses industrial components that are stable in performance and highly reliable, and it features protection against touch and misconnection, as well as resistance to wind, sand, salt spray, and ultraviolet rays, fully considering the complex application scenarios of solar photovoltaic systems.