Focus on the Internet of Things, sensor design-manufacturing-technical solutions!
Engineering Department:+86-510-85382096 | 中文
-
-
MEMS technology, brand quality manufacturing
-
Focus on professionalism and technical solutions
-
-
-
-
The inclination sensor is installed at the end of the drill rod, which can achieve real-time dual-axis attitude measurement under the motion conditions of the drill rod structure. The inclination sensor installed on the chassis of the vehicle can accurately measure the attitude of the vehicle body relative to the horizontal plane.
Msensor Sensor - Tunnel Bottom Settlement and Deformation Monitoring Static Level Instrument
Within a range of 150 meters from the entrance of the left and right tunnels, static level gauges are evenly arranged at 10-meter intervals on the bottom and side lining walls of the tunnel to monitor tunnel settlement and vertical deformation.
Tilt sensor, safety detection for basket balance control
Working at heights poses significant dangers. To ensure the stability of the吊篮 (suspended basket), one can choose the LVT533T three-axis dual relay output tilt leveling control switch, which can be installed on the吊兰 (suspension crane) mechanical bucket to determine the tilt angle of the吊篮, preventing operational errors caused by the operator's unfamiliarity with the high-altitude environment.
Automated Monitoring Plan for the Safety of Ancient Building Protection Against Inclined Settlement
The main monitoring object of ancient building structures is settlement. The parameter indicators need to be collected from the site physical quantities through corresponding sensors and demodulators, and the data is transmitted to the remote monitoring center database via Ethernet or wireless network. Data processing and analysis are carried out through the structural safety monitoring system software on the upper computer.
Monitoring of tunnel settlement and deformation using static level instruments
Static level gauges for settlement and deformation at the tunnel bottom are evenly arranged at 10m intervals on the tunnel floor and the side lining walls within a range of 150 meters from the tunnel entrance in both left and right tunnels, to monitor the settlement and vertical deformation of the tunnel.
Monitoring the sway posture of wind turbine tower tubes
By monitoring the three-dimensional acceleration, angle, and other data of the wind turbine tower, the posture of the wind turbine tower can be monitored.
Tilt sensor application monitoring IoT billboard system
Msensor Sensor's tilt sensor is used to monitor the IoT billboard system. Once the tilt angle of the billboard exceeds the set safety value, the monitoring data will be transmitted in real-time via a wireless network. Based on the monitoring results, automated warnings will be issued, sending reminder messages to notify relevant departments to address various safety hazards promptly. Recently, in many cities, during severe weather such as strong winds, we have to be extra cautious when walking under these 'giants (large billboards)'. Especially in coastal cities, which are affected by typhoons every year. Msensor Sensor aims to improve urban safety management levels and facilitate regulatory units.
The tilt sensor is used for monitoring and early warning of debris flows and dam landslides.
1. Overview: Landslides, mudslides, and debris flows are the main types of geological disasters in our country, with a level of harm second only to earthquakes, and they occur frequently. Their distribution is very widespread, and the degree of harm is extremely serious. According to incomplete statistics, from the founding of the country until the end of 2010, there have been more than 3,000 large-scale landslides, over 2,000 landslides, and more than 2,000 debris flows nationwide. The number of medium and small-scale landslides, mudslides, and debris flows reaches hundreds of thousands. More than 350 counties, over ten thousand villages, more than 100 large factories, 55 large mines, and over 3,000 kilometers of railway lines across the country have been severely affected by landslides, mudslides, and debris flows.
A robot is a machine device that automatically performs tasks. It can accept commands from humans, run pre-arranged programs, or act according to principles established by artificial intelligence technology. Its task is to assist in replacing human work, such as in manufacturing, construction, or hazardous jobs. Inspection robots are one type of these machines; they are equipped with visible light cameras, infrared thermal imagers, microphones, ultrasonic sensors, tilt sensors, etc. They use trajectory navigation to autonomously or remotely inspect outdoor high-voltage equipment along the optimal path. Through methods such as machine vision, infrared temperature measurement, and sound detection, inspection machines...
Inclination monitoring
X, Y axis, industrial design, small size, low power consumption
Compass heading
X, Y, Z three axis, attitude calculation measurement algorithm
Imu inertial sensor
Three-axis angle, angular velocity, acceleration, magnetic field measurement
Attitude heading reference system
Meet the static, dynamic, high and low temperature of a variety of complex environmental use
Engineering case
After-sales service
Download
Questions & Answers
Industrial Design
Metrological certification
45 days return
Technical Services
Free maintenance
Focus on us
TikTok Official Store
Jingdong Flagship Store
Taobao Enterprise Store
WeChat Public Number
Msensor Sales Network
