Focus on the Internet of Things, sensor design-manufacturing-technical solutions!
Engineering Department:+86-510-85382096 | 中文
-
-
MEMS technology, brand quality manufacturing
-
Focus on professionalism and technical solutions
-
-
-
-
Inclination sensor vehicle body auxiliary leveling device
Convert the tilt angles measured by the inclination sensor of the vehicle platform in two directions into the vertical adjustment amounts for the four support points, and output them on the display interface to provide the operators with a basis for adjustment; detect the horizontal condition of the vehicle platform.
Vehicle Wiper Angle Measuring Instrument
The MK245B angle sensor can measure the rotation angle of the left and right wiper output shafts (mainly measuring the angle of the wiper output shaft relative to the reset position at the starting position and the limit position of the wiper).
The vehicle load wireless positioning anti-theft tracking system receives the vehicle-mounted sensor fusion information through the vehicle's main controller, obtains GPS satellite positioning information through the GPS module, and then communicates bidirectionally with the user terminal via a public mobile communication module through public mobile communication base stations, issuing local sound and light alarms, and achieving mobile, instantaneous control.
Msensor Sensor Chang Tianlong Ship Inclination Monitoring System Solution
The "Ship Inclination Monitoring System" can achieve real-time display of tilt angles, exceedance alarm reminders, data storage, and on-demand customization functions, making up for the shortcomings of the "Six-Point Draft Monitoring System" which only displays the ship's draft.
Tilt sensor application for monitoring the navigation posture of ships
The tilt sensor is generally installed on the horizontal platform of the ship's deck to measure the tilt angle of the hull itself during navigation or when docking. There is a risk of capsizing when the hull exceeds 35°, so the tilt angle must not exceed 35°. When the hull's angle is greater than 15°, an alarm signal is required, and if necessary, corresponding protective measures should be taken or the ship's engine should be forcibly stopped to ensure safe navigation, especially in windy and rough conditions. Therefore, the tilt sensor has become an essential measuring tool for the safe operation of ships.
The tilt sensor is used for monitoring applications in sand dredging vessels.
Sand dredging boats and fishing boats, collectively referred to as fishing vessels, can be used for fish catching, processing, and transportation. Fishing boats are vessels for catching and harvesting aquatic plants and animals, and they also include some auxiliary vessels for modern fishing production, such as those for processing aquatic products, transportation, aquaculture, resource surveys, fishery guidance and training, as well as executing fishery administration tasks. Most fishing vessels are relatively small, but to adapt to continuous navigation and operations in wind and waves, they require good stability, wave resistance, and seaworthiness, with structures that need to be particularly sturdy. The load capacity of fishing vessels varies greatly during operations, with small to medium-sized fishing boats generally ranging from tens to hundreds of tons.
Tilt sensor application for monitoring the navigation posture of ships
A ship is a waterborne tool used for transportation and operations. It relies on human power, sails, or motors to move on water and is an indispensable tool in water transportation. Modern ships utilize various sensors, such as tilt sensors, acceleration sensors, vibration sensors, and speed sensors. These sensors can measure parameters like the tilt angle, acceleration, vibration, and speed of the ship during navigation to monitor its operational status. Tilt sensors are generally installed on the level platform of the ship's deck to measure the tilt of the hull itself during navigation or when docking.
The tilt sensor is used for detecting the operating posture of ambulances.
Ambulances are an indispensable means of transportation in any country, serving as vehicles to assist patients. Currently, they are equipped with splints and supports to stabilize broken limbs and prevent further injury to the patient's neck and spine. In recent years, the application of sensors has become ubiquitous in industries such as engineering and transportation, but the use of tilt sensors in the medical field is quite rare. Nowadays, many ambulances have started to incorporate tilt sensors. So, what is the specific application of tilt sensors in ambulances?
From the construction of the car, the installation of the steering wheels (front wheels), steering knuckles, and front axle has a certain relative position. This installation with a certain relative position is called steering wheel alignment, also known as front wheel alignment. Front wheel alignment includes caster angle, camber angle, toe angle, and front wheel toe. For the two rear wheels, there is also a relative position of installation with the rear axle, called rear wheel alignment. Rear wheel alignment includes wheel camber angle and individual rear wheel toe. Thus, front wheel alignment and rear wheel alignment together are called four-wheel alignment. When the vehicle leaves the factory, the alignment angles are all
Inclination monitoring
X, Y axis, industrial design, small size, low power consumption
Compass heading
X, Y, Z three axis, attitude calculation measurement algorithm
Imu inertial sensor
Three-axis angle, angular velocity, acceleration, magnetic field measurement
Attitude heading reference system
Meet the static, dynamic, high and low temperature of a variety of complex environmental use
Engineering case
After-sales service
Download
Questions & Answers
Industrial Design
Metrological certification
45 days return
Technical Services
Free maintenance
Focus on us
TikTok Official Store
Jingdong Flagship Store
Taobao Enterprise Store
WeChat Public Number
Msensor Sales Network
