Focus on the Internet of Things, sensor design-manufacturing-technical solutions!
Engineering Department:+86-510-85382096 | 中文
-
-
MEMS technology, brand quality manufacturing
-
Focus on professionalism and technical solutions
-
-
-
-
Three-axis angle attitude monitoring of aircraft control surfaces
The aircraft control surface angle measurement attitude system consists of a wireless angle measurement sensor and a wireless angle measurement display. In this system, the angle measurement sensor measures the tilt angle and heading angle of the aircraft control surface, and then wirelessly transmits it to the receiving device - the angle measurement display; the angle measurement display shows the received tilt angle and heading angle in an LCD instrument format.
The verticality of the mast determines whether the drilled hole is qualified, especially for pile drivers, where verticality is an important indicator of the reliability of the building. Therefore, maintaining good verticality or drilling at a certain angle is a common issue encountered during construction. In the electric-hydraulic control system, a dual-axis tilt sensor can be directly installed on the mast to achieve this function. At the same time, operators can input tilt data through the PLC human-machine interface device, and the drilling machine will automatically drill at the set angle. Recommended configuration: (1) Dual-axis tilt sensor + tilt display instrument. Choose the HMI-336T dual-axis digital tilt sensor to monitor the current angle value in real-time. This is a dual-axis measuring horizontal sensor, paired with the DMI2500 tilt display instrument, which allows for an intuitive display of the vertical angle value on the screen. Figure 1.1 HMI-336T rotary drilling rig and pile driver mast verticality measurement and control system. This solution is the simplest and most cost-effective, and our company has provided this configuration to many enterprises. The instrument can be placed in the cab, can be hole-mounted, or directly fixed in a convenient position. The sensor is installed on the mast and connected to the instrument via a dedicated connection cable. Just connect the instrument to a 24V DC power supply. Connection cables are available in specifications of 2m, 5m, 10m, 12m, 15m, etc. Function description: 1. Absolute angle display (default screen) 2. Relative angle display (switch screens using up and down arrows) 3. Relative zero point reset (6-digit numeric keys to reset the zero point) 4. Alarm angle setting (switch to the alarm angle setting interface to set the alarm angle value).
On December 4th, the 2020 Science and Technology Achievements Express Train Wuxi Internet of Things Special Event, organized by the Torch Center of the Ministry of Science and Technology, was successfully held at the one-stop service center in Wuxi High-tech Zone, Suzhou. Wuxi High-tech Zone focuses on deploying innovation chains around the industrial chain, promoting the transformation of major R&D achievements and scientific research capabilities into new products, new industries, and new driving forces in Wuxi, better serving the industrial transformation and upgrading and high-quality economic development of the entire region. Yu Lei, Deputy Director of the Policy and Coordination Department of the Torch Center of the Ministry of Science and Technology, Zhang Honggang, Deputy Director of the Organization Department of the Jiangsu Provincial Department of Science and Technology, Zhu Xiaohong, Deputy Director of the Wuxi High-tech Zone Management Committee and Deputy Mayor of Xinwu District, district leader Wang Dandan, Zou Jianchun, Deputy Director of the Wuxi Municipal Science and Technology Bureau, and Xiao Ying, General Manager of the Jiangsu Provincial Technology Property Rights Trading Market attended the launch ceremony that morning. More than 100 representatives from relevant municipal and district departments, industry experts, social carriers, technology enterprises, universities, research institutes, and technology management agencies participated in the morning launch ceremony and the afternoon roadshow activities. In light of the current normalized epidemic prevention and control, the event site also set up a "Technology Anti-epidemic" themed exhibition area, where a number of high-tech zone enterprises that made outstanding contributions in this year's epidemic battle showcased their latest technological achievements, applications, and excellent cases in the anti-epidemic battlefield, demonstrating the innovative strength and social responsibility of technology enterprises in the Internet of Things highland. The Science and Technology Achievements Express Train is a public service brand for the transformation of scientific and technological achievements with national influence, jointly created by the Torch Center of the Ministry of Science and Technology and local science and technology management departments. As a national highland for the Internet of Things industry, Wuxi High-tech Zone has successfully applied for the "Science and Technology Achievements Express Train Wuxi Internet of Things Special Event" since 2019, relying on its strong industrial foundation and continuously optimized industrial ecosystem. Since the event was launched, Wuxi High-tech Zone has continuously promoted the coupling and coordination of industry-university-research cooperation and the transformation of scientific and technological achievements, leveraging the platform of the Science and Technology Achievements Express Train to promote the transformation of major R&D achievements and scientific research capabilities into new products, new industries, and new driving forces in Wuxi, better serving the industrial transformation and upgrading and high-quality economic development of the entire region.
Tilt sensor power tower, communication tower tilt safety monitoring
The intelligent monitoring system for transmission line towers consists of a front-end monitoring device and a back-end monitoring center. The front-end monitoring device is designed using high-precision dual-axis tilt sensors and microelectronic control technology. The dual-axis tilt sensor can measure the tilt angle of the tower in both the longitudinal and transverse directions in real-time, with the working mode and transmission method set by a microprocessor through program instructions, including zero point setting, transmission baud rate setting, and data encoding methods.
The inclination sensor is installed at the end of the drill rod, which can achieve real-time dual-axis attitude measurement under the motion conditions of the drill rod structure. The inclination sensor installed on the chassis of the vehicle can accurately measure the attitude of the vehicle body relative to the horizontal plane.
Msensor Sensor - Tunnel Bottom Settlement and Deformation Monitoring Static Level Instrument
Within a range of 150 meters from the entrance of the left and right tunnels, static level gauges are evenly arranged at 10-meter intervals on the bottom and side lining walls of the tunnel to monitor tunnel settlement and vertical deformation.
The main assessment focuses on the age of the equipment, the number of workers, the actual records of quality control cards in the production process, the signatures and dates of quality inspectors, the status of 5S management, the status of HSE management control, and whether workers are performing safety operations in accordance with national and industry safety management regulations.
In order to further promote cooperation between schools and localities, as well as between schools and enterprises, and to build a platform for the exchange and cooperation of talents, technology, and projects, we are targeting the recruitment of scientific and technological talent projects, attracting talents and intelligence, facilitating industry-university-research cooperation, and inviting institutions that provide services in Hefei and surrounding areas. The Wuxi High-tech Zone (Xinwu District) is hosting the 2020 Wuxi "Hundred Enterprises Thousand Talents University Tour" Hefei special event.
Tilt sensor, safety detection for basket balance control
Working at heights poses significant dangers. To ensure the stability of the吊篮 (suspended basket), one can choose the LVT533T three-axis dual relay output tilt leveling control switch, which can be installed on the吊兰 (suspension crane) mechanical bucket to determine the tilt angle of the吊篮, preventing operational errors caused by the operator's unfamiliarity with the high-altitude environment.
Inclination monitoring
X, Y axis, industrial design, small size, low power consumption
Compass heading
X, Y, Z three axis, attitude calculation measurement algorithm
Imu inertial sensor
Three-axis angle, angular velocity, acceleration, magnetic field measurement
Attitude heading reference system
Meet the static, dynamic, high and low temperature of a variety of complex environmental use
Engineering case
After-sales service
Download
Questions & Answers
Industrial Design
Metrological certification
45 days return
Technical Services
Free maintenance
Focus on us
TikTok Official Store
Jingdong Flagship Store
Taobao Enterprise Store
WeChat Public Number
Msensor Sales Network
