Focus on the Internet of Things, sensor design-manufacturing-technical solutions!
Engineering Department:+86-510-85382096 | 中文
-
-
MEMS technology, brand quality manufacturing
-
Focus on professionalism and technical solutions
-
-
-
-
Tilt sensor and static level gauge application for gate tilt and settlement monitoring scheme
The Jiangsu Province Jianbi Ship Lock Management Office (located in Zhenjiang City) uses our company's tilt sensors and static level gauges for deformation observation of the ship lock gates (mainly tilt and settlement observation). The general plan is as follows:
System Composition
The automatic monitoring system for gate deformation mainly consists of a liquid storage tank, connecting pipes, static level gauges, and a deformation monitoring backend. The specifics are as follows:
① Liquid storage tank ② Reference point level gauge
③ Monitoring point level gauge ④ Wireless gateway
⑤ Solar panel ⑥ Liquid connecting pipe (red)
⑦ Air connecting pipe (yellow) ⑧ Observation cable (black)
During the deformation observation process, static level gauges are evenly distributed along approximately equal elevation lines according to the direction of the gate, mainly placing monitoring nodes on the gate. Settlement observation is conducted jointly by the liquid storage tank, reference point, and test points, enabling functions such as storage, preprocessing, management analysis, visualization analysis, and limit value early warning of settlement monitoring data.
Plan Design
According to the specific situation of the Jianbi Ship Lock, it is necessary to install a total of 4 high-precision settlement monitoring gates with 8 leaves. Based on the requirement to monitor key positions at the gate head and gate tail, the proposed plan is: each gate forms an independent monitoring unit, meaning each unit includes 1 liquid storage tank (blue rectangle), 1 reference device (red triangle), and 2 monitoring devices (red dots), with a total of 8 independent monitoring units (green circles) forming a deformation monitoring system.
Overall layout schematic (subject to actual conditions)
Schematic of independent units
Two static level gauges are installed on the gate, and a reference point static level gauge is installed near the building.
Inclination monitoring
X, Y axis, industrial design, small size, low power consumption
Compass heading
X, Y, Z three axis, attitude calculation measurement algorithm
Imu inertial sensor
Three-axis angle, angular velocity, acceleration, magnetic field measurement
Attitude heading reference system
Meet the static, dynamic, high and low temperature of a variety of complex environmental use
Engineering case
After-sales service
Download
Questions & Answers
Industrial Design
Metrological certification
45 days return
Technical Services
Free maintenance
Focus on us
TikTok Official Store
Jingdong Flagship Store
Taobao Enterprise Store
WeChat Public Number
Msensor Sales Network
